Commercial Shade Structures
What We Do
What a Commercial Shade Structure Is and What We Do
A commercial shade structure is a permanent overhead system protecting people, vehicles, animals, or equipment, engineered well beyond tents or residential covers. It uses:
- Premium powder-coated steel frames engineered to site-specific load requirements.
- Commercial-grade shade fabric with manufacturer-backed warranties that vary by product.
- A full design process and industrial materials built to code for constant exposure.
- Protection sized for central Texas UV, which the EPA rates Very High to Extreme from late spring through early fall.
Every project starts with a site visit and free estimate; we design, fabricate, and install start to finish.
Engineering Built to Hold Up in Texas
Engineering is what separates a structure that lasts from one that fails early. Here is how we build ours to hold up:
- Footings and anchors are sized to the span, fabric tension, and soil, from Hill Country clay to IH-35 caliche.
- Frame design accounting for uplift and lateral bracing, since wide fabric acts like a sail in wind.
- Correct fabric tensioning and pitch so water runs off instead of pooling and failing the fabric early.
- Powder coat over primed steel that resists central Texas UV, humidity, and surface rust.
- HydroVac excavation to expose utilities and confirm soil before committing to a footing design.
Our Process, Site Visit to Closeout
Every commercial build runs the same clear path from first visit to final walkthrough, in five steps:
Site evaluation and estimate: we measure, assess sun angles, review soil, and give a clear estimate before anything moves.
Design and Engineering. a custom 3D design lets you see the structure before groundbreak, with documentation for commercial projects.
Permitting support: we walk you through what your scope and jurisdiction require and provide the engineering documents.
Fabrication: your structure is built in our New Braunfels facility, controlling quality and timeline in-house.
Installation and closeout: our crew installs, cleans up, walks you through, and provides any closeout documentation.
Industries We Build Shade For
From dealerships to dog parks, we build permanent shade across Texas industries. Here’s where we work and what shade does for each:
Dealerships:
Parks and Playgrounds:
Parks and Playgrounds:
RV Resorts:
RV Resorts
Corporate Parking
Corporate Parking
Car Washes
Car Washes
Sports Complexes
Sports Complexes
Pet Parks
Pet Parks
Restaurants
Restaurants
Superstructures and Custom Projects
Superstructures and Custom Projects
Schools and Daycares
Schools and Daycares
HOAs
HOAs
Full In-House Since 2004
Not every Texas shade company handles the full job start to finish. ShadePro does. Here is what sets us apart:
- Over 20 years in commercial shade, serving Texas businesses since 2004.
- Full in-house process: we design, fabricate, and install every structure ourselves.
- Commercial-grade fabric with manufacturer-backed warranties that vary by product.
- Steel frames engineered to site-specific loads, with warranty coverage on completed structures.
- Every system custom-built to your site, never adapted from a generic kit.
- BBB accredited and an approved BuyBoard Texas vendor for school and government projects.
- 3D design modeling so you see the finished project before installation begins.
When Heat Starts Costing You
Commercial clients usually call once a heat problem gets expensive enough to fix properly. We hear from businesses when:
- Customers, employees, or guests avoid outdoor areas because of the heat.
- Vehicles or equipment sit in full sun and take damage over time.
- A playground or recreation area is unusable during peak hours.
- The facility needs to meet shade requirements for licensing or compliance.
- An outdoor seating area, waiting zone, or common space is underused.
- Temporary fixes keep failing and need patching again.
- A new build or renovation needs shade designed in from the start.
If your outdoor space has a problem, permanent shade is usually the most cost-effective fix; we will come evaluate your site.
Based in New Braunfels, Building Across Texas
Our facility is in New Braunfels, which means faster response, easier site visits, and a team that knows local conditions, with projects statewide.
We have installed at businesses, schools, parks, and facilities across Texas, including:
- New Braunfels (all commercial zones, including IH-35 corridor, FM 306, Gruene area)
- San Antonio and surrounding metro
- Seguin
- San Marcos
- Kyle and Buda
- Wimberley
- Boerne
- Schertz, Cibolo, and Converse
- Kerrville and the broader Hill Country region



























































































































































